IQ’s top tips to understanding sound insulation in architectural glazing.
To understand how sound insulation in architectural glazing works, it’s important to understand how sound itself travels and transmits. Sound arises from molecules vibrating in a gas, solid or liquid from a source. The number of vibrations a second is known as the frequency and is measured in Hertz (Hz).
The length of the frequency corresponds to the pitch of the sound; the shorter the ‘period’ between frequency waves, the higher the frequency and higher the pitch, and vice versa. A human ear can detect frequencies between 16Hz to 20000Hz. When considering acoustics for building or architecture it is generally the range between 50Hz and 5000Hz that we are concerned with and which will affect the comfort levels of those working or living inside a building or structure.
The two measurements that are looked at for sound insulation in architectural glazing are Hertz (Hz) and decibels (dB).
Sound Insulation is used in buildings and architecture
Specifying materials, such as glass, with higher levels of sound insulation can help to reduce the amount of environmental noise able to resonate with the internal areas of a building using various building materials and practices.
Certain sound reduction criteria will be specified for buildings and renovations in central city areas. A noise level of over 60Db will cause stress and release a steady stream of adrenaline into the bloodstream.
If you experience levels above 65Db during the day you are at a 20% higher risk of stress-related illnesses such as heart attacks.
It is for this reason that sound reduction in buildings is becoming a more prevalent performance factor when specifying building materials, including an increase in the importance of sound insulation in architectural glazing.
The acoustic insulation property of a specific material or frame is defined by R which represents the acoustic power difference from one side of the material to another. This value is measured in specific laboratory settings under BS EN standards in order to achieve a constant, corresponding acoustic index across all building materials.
It is the Rw value that is the most common method of rating the sound insulation in architectural glazing. It incorporates the weighted corrections for the human ear as a receptor and is expressed in Db.
These Rw values are measured in factory settings and therefore, cannot always give a true reflection of the sound insulation of a building when incorporating things like roof joints, hollow flooring and connections and how the whole installation will perform under various ‘real-life’ acoustic situations and sources.
Corrections to the Rw value can be included to give a more accurate determination of the sound insulation of an installation.
These two corrections are broken down by EN ISO 717-1 as ‘pink noise’ (C) which represents outside background noise and ‘road traffic noise’ (Ctr) and are incorporated with Rw to create a common index of Rw(C;Ctr). Both C and Ctr are generally a negative value, detracting from the total sound insulation of the whole installation to give a more realistic noise reduction factor.
How to Soundproof With Specialist Glazing
When it comes to sound insulation in architectural glazing, every glass type and thickness will vibrate differently at different frequencies meaning that at certain frequencies the noise reduction value of a glass installation can be very low. By changing the composition and thickness of the glass you can move this dip in sound insulation towards lower frequencies making the noise more comfortable to hear but in order to reduce the critical frequency to below 100Hz, making it insignificant enough to be ignored, the glass would have to be 12cm thick!
Acoustic interlayers, which are used for sound insulation in arhcitectural glazing, work by changing the oscillating nature of the glass panel and therefore removing this critical frequency effect, allowing the glass to maintain a steady acoustic reduction up all frequencies. Using an acoustic interlayer into a glass unit will increase the sound insulation factor (R) from around 3Db to 5Db depending on the glass installation, and depending on the glass composition will give you an overall Rw value of anywhere from 35Db to 49Db.
These high acoustic value glass units can be used for internal uses in office spaces to reduce sound transference between spaces, on external faces to reduce airport or traffic noise, or on roof glazing to reduce external noise and impact noise of rain upon the horizontal surfaces.
Ensuring that a build and design have adequate sound insulation will ensure a higher comfort level for the inhabitants of the building or structure, be that a workplace or home. Acoustic interlayers can be laminated in the largest glass panels available in the UK giving much greater freedom with the design.
There are many factors that can impact the sound insulation in architectural glazing systems, and the values are always calculated on a project by project basis due to the bespoke nature of our glazing. If you are installing acoustic glass into a framing you will need to consider the acoustic rating of the framing system itself to determine how the whole installation will insulate against sound pollution.
For more information on sound insulation in architectural glazing, contact the IQ team today who will be happy to assist.
Latest posts by Rebecca Clayton (see all)
- The Construction Story of the Floating Glass Box - May 10, 2022
- Glazing Thermal Performance Updated Building Regulations Approved Document L - May 7, 2022
- Best Innovative Architectural Glazing in Scotland, Ireland and Wales - March 25, 2022
- Ultimate Guide to Sound Insulation in Architectural Glazing - February 18, 2022
- A Guide to Natural Light in Architectural Design - April 23, 2021